Single Pole Barrier /Turnstile (DK-230)

Functions and features:
1. Well in design, rustproof, durable and can resist external destroy.
2. Self-inspection and alarm.
3. Clutch transmission mechanical system, durable, no noise and long life.
4. Easily integrated with any type of readers such as IC, ID, bar code and even magnetic card.
5. Bi-directional passing or single way passing.
6. Adjustable normally open or normally closed, in order to meet the requirements of the different venues.
7. Arm close delay function, after a valid pass, arms close in 10 seconds. (adjustable, from 1-60s)
8. Anti-rush function: If there is no open single, arm will be holding tightly
9. Valid lock function can allow one passage at one time
10. Optional LED Counting and Direction indicating
11. Anti-clipping function. During its reposition, if arm meets any obstacle, arm will get back automatically or stop working for a while.
12. It will lock automatically if passage through turnstile is not completed within pre-set time, the setting-time can be adjusted via parameter change. &
v id="StyleTableProd">

Model No	DK-230
Material:	304# stainless steel, 1.5mm thick
Contains:	Mechanism, Housing, Driver board, power supply
Power supply:	AC220V±10V ,50Hz / AC110V±10V ,60Hz
Power consumption	Working state:<60 Watt
Input Interface:	+12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
Communication Interface:	RS485 standard, communication distance ≤ 1200m
Access Mode:	Automatic (when power off, arms open automatically, while power on later, arms close automatically )
Following Speed:	30 persons/min (By Card)
Dimension:	600*220*1000mm
lane width:	<=1200mm
Arm length:	600mm
Net weight:	40kg
Work Environment:	indoor or outdoor (shelter) temperature: -10~ 60 Relative humidity: ≤ 95%, non-condensing

  &